RS Bitukold Spray
RS Bitukold Spray
RS Bitukold Spray is a rapid setting, cold applied Bitumen emulsion designed for sealing vertical joints.
The cationic formulation of RS Bitukold Spray ensures a rapid set even in cold, damp conditions, with an initial cure taking place within 15 minutes.
RS Bitukold Spray is mainly used for the protection of new joints in freshly laid asphalt or macadam.
Where to use?
- Transverse or longitudinal vertical joints
- Patch repairs
- Trench reinstatements
- Drain or manhole frames
- Kerb channels
Preparation
Ensure that the surface is clean and free from loose materials, oil, grease, standing water and weeds.
Application
Shake can well and invert. Apply RS Bitukold Spray in even strokes with nozzle 200-300mm away from area to be treated. Ensure complete coverage. After use, spray briefly with can in upright position to clear nozzle. The coverage rate for RS Bitukold Spray should be 0.7-1.5kg/sq.m., depending on the texture and the porosity of the surface.
Storage
Caution: pressurised container, protect from sunlight. Do not pierce or burn even after use. Do not expose to temperatures exceeding 50°C. Do not spray on a naked flame or any incandescent material. Keep out of reach of children.
Standards
RS Bitukold complies with BS 594987 clause 6.8 Joints, vertical face coating.
Packaging
RS Bitukold Spray is supplied in 600ml aerosols.
Pressurised Container
Read hazard label on can prior to use.